1. Home/
    2. Archives /
  2. News

Archives For November 30, 1999

KeePassXC 2.5.3 Released with Microsoft Edge Integration

Last updated: January 20, 2020

KeePassX 2 YubiKey support

KeePassXC password manager 2.5.3 was released today with stability improvements and new feature: browser extension for Chromium-based Edge browser.

KeePassXC 2.5.3 changelog:

  • Fix possible database lockout when removing a YubiKey from a KDBX 3.1 database
  • Fix crash if Auto-Type is performed on a new entry
  • Fix crash when all entries are deleted from a group
  • Improve the reliability of clipboard clearing on Gnome
  • Do not check cmd:// URLs for valid URL syntax anymore
  • Prevent unnecessary merges for databases on network shares
  • Browser: Prevent native messaging proxy from blocking application shutdown
  • Browser: Improve website URL matching

How to Install KeePassXC 2.5.3 in Ubuntu:

For Ubuntu 18.04 and higher, KeePassXC Snap package (runs in sandbox) can be easily installed via Ubuntu Software.

For those prefer native Ubuntu .deb package, open terminal from application menu or press Ctrl+Alt+T on keyboard, and run following commands one by one:

1.) Run command to add the official PPA, which so far supports for Ubuntu 16.04, Ubuntu 18.04, Ubuntu 19.04, and Ubuntu 19.10.

sudo add-apt-repository ppa:phoerious/keepassxc

Type user password (no asterisk feedback due to security reason) when it prompts and hit Enter to continue.

2. Then upgrade KeePassXC from previous release via Software Updater:

or run commands one by one in terminal to install the password manager:

sudo apt update

sudo apt install keepassxc

Uninstall:

To remove the PPA, open Software & Updates and navigate to Other Software tab.

To remove KeePassXC .deb package, run command in terminal:

sudo apt-get remove --autoremove keepassxc
In Howtos, News
 permalink

TeXstudio 2.12.20 Released! How to Install via PPA

Last updated: January 14, 2020

The open-source LaTeX text editor TeXstudio 2.12.20 was released today as a new bug-fix release for the 2.12 series.

Most notably changes in TeXstudio 2.12.20 include fix bug when replacing highlighted search results, and add \text{} to amsmath.cwl.

How to Install TexStudio 2.12.20 in Ubuntu:

The official PPA has made the new release packages for Ubuntu 16.04, Ubuntu 18.04,
Ubuntu 19.10, Ubuntu 20.04, and their derivatives.

1. Open terminal either by pressing Ctrl+Alt+T on keyboard or by searching for ‘terminal’ from software launcher. When it opens, run command:

sudo add-apt-repository ppa:sunderme/texstudio

Type user password (no asterisk feedback) when it asks and hit Enter to add the PPA.

2. If an old version was installed in your system, remove the texstudio-doc, texstudio-l10n (if any) package before upgrading the software:

sudo apt-get remove texstudio-doc texstudio-l10n

3. After adding the PPA, you can either upgrade it via Software Updater:

or run commands in terminal to install or upgrade the software:

sudo apt-get update && sudo apt-get install texstudio

Uninstall:

To remove the LaTeX editor, run command in terminal:

sudo apt-get remove --autoremove texstudio

And go to Software & Updates -> Other Software to remove PPA repositories.

In Howtos, News
 permalink

Corebird Continuation ‘Cawbird’ Updates with Improvements

Last updated: April 24, 2024

Cawbird DISCONTINUED since 2023! It does not longer work. See the archive in Github page.

Cawbird is a fork of the Corebird GTK twitter client that continues to work with Twitter on Linux.

Corebird became unsupported after Twitter disabled the streaming API. Cawbird takes up the job to work with the new APIs and includes a few fixes and modifications.

Cawbird 1.0.4 was released today as the latest version including following changes::

  • Reduce bespoke themeing and make the main bar use native colors
  • Import favourited images from Corebird
  • Fixed crash caused by Twitter sending invalid entity positions in tweet
  • Fixed tweet length error with counting prime marks (quotes)
  • Update Italian translation

How to Install Cawbird in Ubuntu:

The community maintained Cawbird Snap package, which runs in sandbox, can be easily installed from Ubuntu Software:

For those prefer native .deb package, go to the developer maintained repository at the link below:

Select Ubuntu, then click ‘Grab binary packages directly‘ and download the .deb package for your system.

Finally install the .deb via Gdebi package installer (available in Ubuntu Software) and enjoy!

In Howtos, News
 permalink

Firefox 72.0 Released with Picture-in-picture Video for Linux

Last updated: January 7, 2020

Mozilla Firefox 72.0 was released today. Picture-in-picture video now is available for Linux and Mac OS.

“Picture-in-picture” feature allows web video to be played in a “pop out” window. Simply select the blue icon from the right edge of a web video to pop open a floating window so you can keep watching while working in other tabs.

Other changes in Firefox 72.0 include:

  • Block fingerprinting scripts by default for all users
  • Replaces notification request pop-ups with speech bubble in address bar.
  • Remove support for blocking images from individual domains.
  • Various security fixes.

Download / Install Firefox in Ubuntu:

You’ll be able to upgrade the pre-installed Firefox to the latest 72.0 release in Ubuntu 16.04, Ubuntu 18.04, and Ubuntu 19.10, through the Software Updater in 2 or 3 days (check the building page).

Or install the Firefox 72 Snap package (runs in sandbox) simply from Ubuntu Software. It can be installed alongside pre-installed Firefox, and will automatically update to the latest.

Also Mozilla Firefox website offers non-install (extract and run the executable) tarball for all Linux desktop.

In Howtos, News
 permalink

KeePassXC Password Manager 2.5.2 Released (Ubuntu PPA)

Last updated: January 6, 2020

KeePassX 2 YubiKey support

KeePassXC, KeePass cross-platform community edition, released version 2.5.2 a few days ago. Here’s how to install it in Ubuntu 18.04, Ubuntu 16.04, Ubuntu 19.10 via PPA.

KeePassXC 2.5.2 features significant stability and usability improvements. Changes in the release include:

  • Show UI warning when entering invalid URLs
  • Option to use an entry only for HTTP auth
  • Disable the user interface when merging or saving the database
  • Ability to hide protected attribute after reveal
  • Improve GUI tests reliability on Hi-DPI displays
  • Fix crashes when saving a database to cloud storage

How to Install KeePassXC 2.5.2 in Ubuntu:

For Ubuntu 18.04 and higher, KeePassXC Snap package (runs in sandbox) can be easily installed via Ubuntu Software.

For those prefer native Ubuntu .deb package, open terminal from application menu or press Ctrl+Alt+T on keyboard, and run following commands one by one:

1.) Run command to add the official PPA, which so far supports for Ubuntu 16.04, Ubuntu 18.04, Ubuntu 19.04, and Ubuntu 19.10.

sudo add-apt-repository ppa:phoerious/keepassxc

Type user password (no asterisk feedback due to security reason) when it prompts and hit Enter to continue.

2. Then upgrade KeePassXC from previous release via Software Updater:

or run commands one by one in terminal to install the password manager:

sudo apt update

sudo apt install keepassxc

Uninstall:

To remove the PPA, open Software & Updates and navigate to Other Software tab.

To remove KeePassXC .deb package, run command in terminal:

sudo apt-get remove --autoremove keepassxc
In Howtos, News ,
 permalink

SuperTuxKart 1.1 Officially Released (Ubuntu PPA)

Last updated: January 5, 2020

3D kart racing game SuperTuxKart 1.1 was finally released today after one RC release.

Compared to the previous RC release, SuperTuxKart 1.1 adds ability to change the touchscreen controller type in race paused dialog.

A summary of the new changes according to the release note:

  • Improved online multiplayer play
    • Fix network lags in various scenarios when playing online
    • Add AI support to local networking servers
  • UI enhancements
  • A new arena: Pumpkin Park
  • Mobile enhancements and iOS support
  • Complex text layout and emoji support
  • Story mode timer for speedrunners
  • Generic polish and minor improvements

How to install SuperTuxKart 1.1 in Ubuntu:

The new release package should normally be made into the official PPA in 2 or 3 days, available for Ubuntu 18.04 and higher. CHECK HERE before getting started.

1. Open terminal either by pressing Ctrl+Alt+T on keyboard, or by searching for ‘terminal’ from app launcher. When it opens, run command:

sudo add-apt-repository ppa:stk/dev

Type user password (no asterisk feedback) when it prompts and hit Enter to continue.

2. Then either upgrade SuperTuxKart from an existing version via Software Updater:

or install the game via commands:

sudo apt update

sudo apt install supertuxkart

Once installed, open the game from your system application launcher and enjoy!

Uninstall:

To remove SuperTuxKart, open terminal and run command:

sudo apt remove --auto-remove supertuxkart supertuxkart-data

To remove the PPA, open Software & Updates -> Other Software, and remove the repository line:

In Howtos, News
 permalink

Shotwell 0.30.8 Released with Fix for Tumblr Publishing

Last updated: January 4, 2020

Shotwell Photo Manager

Shotwell 0.30.8 was released today as the latest stable version. Here’s how to install it in Ubuntu 18.04 and higher.

Shotwell 0.30.8 comes with updated translations and some bug-fixes, including:

  • Fix keyboard shortcut for adding tags
  • Fix Tumblr publishing issue
  • Fix month name translation in date/time chooser

Shotwell 0.23.5

How to install Shotwell 0.30.8 in Ubuntu:

If you’re OK with the flatpak package, which runs in sandbox, Shotwell 0.30.8 flatpak is available HERE.

Also Shotwell stable PPA maintains native .deb packages for Ubuntu 18.04 and higher, and v0.30.8 will be available in a few days (You may check the PPA link before getting started).

1. Open terminal (Ctrl+Alt+T) and run command to add PPA:

sudo add-apt-repository ppa:yg-jensge/shotwell

2. To upgrade Shotwell from a previous, launch Software Updater and install available updates.

upgrade shotwell

NOTE: To undo the installation, and downgrade shotwell to the stock version in your Ubuntu repository, run command to purge the PPA:

sudo apt install ppa-purge && sudo ppa-purge ppa:yg-jensge/shotwell
In Howtos, News
 permalink

Clementine 1.4 RC1 Available to Install in Ubuntu 18.04,19.10

Last updated: January 3, 2020

Clementine Music Player

The first release candidate of Clementine 1.4.0, an audio player inspired by Amarok 1.4, was released today.

Though the last 1.3.1 was released more than 3 years ago, the development of Clementine is being active all the time. Now Clementine 1.4.0 rc1 is available to install in Ubuntu 18.04, Ubuntu 19.04, Ubuntu 19.10 with no announcement or change-log though.

Go to the release page by clicking the link below:

Clementine Releases

Select download the .deb package from your Ubuntu edition.

  • bionic for Ubuntu 18.04, and Linux Mint 19.x
  • disco for Ubuntu 19.04
  • eoan for Ubuntu 19.10.
  • and amd64 for 64-bit system, i386 for 32-bit system.

Finally install the package either via Gdebi package installer or by running command in terminal:

sudo dpkg -i ~/Downloads/clementine_1.4.0*.deb

Once installed, open the music player from your system application launcher and enjoy!

In News
 permalink

Clementine Music Player 1.3.9 Released for Testing (How to Install)

Last updated: January 3, 2020

Clementine Music Player

Now it’s Clementine 1.4.0 rc1. Binary packages are available to download in the github releases page.

Clementine, an open-source audio player inspired by Amarok 1.4, released version 1.3.9 (then 1.3.92) a few days ago. Here’s how to install it in Ubuntu.

Though the last version 1.3.1 was released more than 3 years ago, Clementine player is still in active development, and version 1.3.9 (as well as 1.3.92) was released in recent days as the test release. However, there’s no announcement, no change-log so far. They seem to be the development releases for the next major release.

The latest Clementine 1.3.92 is available to download in the link below:

Clementine Developer Build

So far it offers .deb packages for Ubuntu 18.04 (bionic), Ubuntu 19.04 (disco), and Ubuntu 19.10 (eoan).

Just grab the .deb matches your Ubuntu edition (amd64 for 64-bit) and click install via Gdebi (install it via Ubuntu Software) package installer.

Once installed, open the player from your system application launcher and enjoy!

In Howtos, News
 permalink

MPV media player 0.31 Released (Ubuntu PPA)

Last updated: December 28, 2019

MPV media player logo

MPV, an open-source MPlayer nd MPlayer2 based media player, released version 0.31 today.

Changes in MPV 0.31 include:

  • Allow configurable swapchain color space for native HDR output
  • Add mechanisms for better logging as preperation for console.lua
  • Introduce a pseudo key name that grabs all text input
  • Add grab zone for resizing window with mouse
  • Implement pseudo client side decorations via OSC
  • Add video filter using vo_gpu’s renderer
  • Added console.lua: interactive REPL for input commands
  • Display Santa hat for idle logo in December
  • Add option to autoselect known good hwdec implementations
  • Peplace old event tap for media key support with MediaPlayer
  • Remove Apple Remote support
  • Many fixes and minor enhancements

How to Install MPV 0.31 in Ubuntu:

Although it’s not available at the moment of writing, you can add the Doug McMahon’s PPA in Ubuntu 18.04, and receive MPV package updates once published via Software Updater.

1.) Open terminal either by pressing Ctrl+Alt+T on keyboard or by searching for ‘terminal’ from application menu. When it opens, run command to add the PPA:

sudo add-apt-repository ppa:mc3man/mpv-tests

Type user password (no asterisk feedback) when it prompts and hit Enter.

2.) If a previous version of MPV was installed, launch Software Updater and you’ll see new MPV package available to upgrade.

Or run command one by one in terminal to install (upgrade) MPV:

sudo apt install mpv

Uninstall:

To downgrade MPV to the stock version in Ubuntu main repositories, run command to purge the PPA:

sudo apt install ppa-purge && sudo ppa-purge ppa:mc3man/mpv-tests

To remove the PPA only, go to Software & Updates -> Other Software tab.

To simply remove MPV media player, either use Ubuntu Software or run command in terminal:

sudo apt remove --autoremove mpv
In Howtos, News
 permalink