UbuntuHandbook | Author Archives

Archives For November 30, 1999

Pitivi Video Editor 2020.09 Released, How to Install in Ubuntu 20.04

Last updated: October 14, 2020

Pitivi video editor 2020.09 was released a few days ago. Here’s how to install it in Ubuntu 20.04, Ubuntu 18.04, and derivatives.

It’s been more than 2 years since the last stable release, Pitivi 2020.09 features a plugin system, easy Ken-Burns effect, developer console plugin, timeline markers, user-interface and workflow improvements, a refactored media library, new keyboard shortcuts, and much more.

How to Install Pitivi in Ubuntu:

The new release has been into Ubuntu 20.10 universe repository. For Ubuntu 18.04, Ubuntu 20.04, Linux Mint and other Linux, it can be installed via Flathub repository.

1. Open terminal from system application launcher, then run command to install Flatpak (if you don’t have it):

sudo apt install flatpak

For Ubuntu 18.04, you have to add the PPA first before installing the flatpak daemon:

sudo add-apt-repository ppa:alexlarsson/flatpak && sudo apt update

2. Then add the flathub repository by running command:

flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo

3. Finally install Pitivi video editor:

flatpak install flathub org.pitivi.Pitivi

Uninstall Pitivi Flatpak package:

For any reason, you can remove the flatpak package easily by running command in terminal:

flatpak uninstall org.pitivi.Pitivi

In Howtos, News pitivi

Linux Kernel 5.9 Released! How to Install it in Ubuntu

Last updated: October 12, 2020

Linux Kernel 5.9 was released a day ago. Linus Torvalds announced that:

Ok, so I’ll be honest – I had hoped for quite a bit fewer changes this last week, but at the same time there doesn’t really seem to be anything particularly scary in here. It’s just more commits and more lines changed than I would have wished for.

The bulk of this is the networking fixes that I already mentioned as being pending in the rc8 release notes last weekend. In fact, about half the patch (and probably more of the number of commits) is from the networking stuff (both drivers and elsewhere).

…

Linux 5.9 features initial Intel Rocket Lake graphics, NVMe zoned namespaces (ZNS) support, 32-bit x86 Clang build support, initial support for Radeon RX 6000 “RDNA 2” graphics cards, and more.

How to Install Linux Kernel 5.9 in Ubuntu:

The mainline kernels do not include any Ubuntu-provided drivers or patches. They are not supported and are not appropriate for production use.

For a graphical tool to install updated kernel package, try Mainline.

The mainline kernel packages for Linux 5.9 (64-bit) are now available for download at the link below:

Download Kernel 5.9

Select generic for common system, and lowlatency for a low latency system (e.g. for recording audio):

linux-headers-5.9.0-xxxxxx_all.deb
linux-headers-5.9.0-xxx-generic(/lowlatency)_xxx_amd64.deb
linux-modules-5.9.0-xxx-generic(/lowlatency)_xxx_amd64.deb
linux-image-xxx-5.9.0-xxx-generic(/lowlatency)_xxx_amd64.deb

Alternatively you can download and install the kernel binaries via terminal commands ( open terminal via Ctrl+Alt+T):

cd /tmp/

wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9/amd64/linux-headers-5.9.0-050900_5.9.0-050900.202010112230_all.deb

wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9/amd64/linux-headers-5.9.0-050900-generic_5.9.0-050900.202010112230_amd64.deb

wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9/amd64/linux-image-unsigned-5.9.0-050900-generic_5.9.0-050900.202010112230_amd64.deb

wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9/amd64/linux-modules-5.9.0-050900-generic_5.9.0-050900.202010112230_amd64.deb

sudo dpkg -i *.deb

Once installed, restart your computer and enjoy!

Uninstall Linux Kernel 5.9:

Restart your machine and select boot with the previous kernel in boot menu ‘Grub2 -> Advanced Option for Ubuntu’. Then run command to remove Linux Kernel 5.9:

sudo dpkg --purge linux-image-unsigned-5.9.0-050900-generic

In News kernel

Liferea 1.3.3 Released with Webkits Intelligent Tracking Protection [PPA]

Last updated: October 11, 2020

Liferea, Linux Feed Reader, released version 1.3.3 a few days ago with a lot of improvements. Here’s how to install it in Ubuntu 18.04, Ubuntu 20.04.

Liferea 1.3.3 release highlights:

Implement support for Webkits Intelligent Tracking Protection
Add Ctrl + 0 hotkey to reset zoom
Add debug printing of SAX parser errors
CSS color update on theme change without restart
Fixes view mode switch
Default to https:// instead of http://
Progress bar support when loading web pages
Drop CDF channel support
Drop PIE aka. Atom 0.2/0.3 support
Drop RSS namespace “blogChannel” support

Install Liferea 1.3.3 via PPA:

1.) Open terminal from application launcher and run command to add the unofficial PPA:

sudo add-apt-repository ppa:ubuntuhandbook1/apps

Type your password when it prompts and hit Enter to continue.

2.) Then check updates and install the news reader via commands:

sudo apt update

sudo apt install liferea

or update the old package (if installed) via Software Updater utility:

Uninstall:

As the PPA also contains many other applications, you may remove the PPA either via Software & Updates > Other Software, or by running command:

sudo add-apt-repository --remove ppa:ubuntuhandbook1/apps

And remove the feed reader if want via command:

sudo apt remove liferea

In News Feed Reader

MPZ – New Linux Music Player for Big Local Collections

Last updated: April 24, 2024

Looking for a Linux music player to manage large local collections? Mpz is a new open-source player that does the job.

If you like to organize your music in folders, then this player might be for you. It doesn’t try to index all the files into a library, but rather treats your files and folders as a library and provides a convenient way to create playlists directly from folders. Similar to Foobar2000’s Album List, but it’s not an attempt to clone.

The main feature is 3-columns UI allows you to quickly create playlists from folders via middle-click and switch between playlists.

Other mpz features include:

Built with Qt/C++ with fast and responsive native UI;
Supports internet radio in m3u and pls playlists formats;
Supports CUE sheets;
Supports MPRIS on Linux for remote control;
Configuration in 2 yaml files
Supports global media keys and non-global shortcuts.

How to Install mpz in Ubuntu:

The software developer maintains binary packages for Ubuntu, Debian, CentOS, Fedora, openSUSE, etc, which are available to download at the link below:

Download MPZ

For Ubuntu, grab the deb package and install it either via Gdebi or apt command in terminal:

sudo apt install ./Downloads/mpz*.deb

(Optional) To remove the music player application, run command:

sudo apt remove mpz

In App Review big music collections

LazPaint – Raster Image Editor Similar to Paint.Net / PaintBrush

Last updated: April 24, 2024

Looking for an image editor similar to Windows Paint.Net or Mac OS PaintBrush? LazPaint is the open-source image editor that works on Linux.

LazPaint is an image editor with layers and transparency. It’s written in Lazarus (Free Pascal) and uses BGRABitmap library. With OpenRaster format support it can interoperate with MyPaint, Gimp and Krita.

Features include:

Read and write a variety of file formats, including layered bitmaps and 3D files.
Tools: many tools are available to draw on the layers.
Select parts of an image with antialiasing and modify the selection as a mask.
View: color window, layer stack window and toolbox window.
Command line support.
Keyboard shortcuts support.

How to Install LazPaint in Ubuntu:

The image editor offers .deb packages available to download at the link below:

LazPaint Releases

Just grab the latest deb package, and install it by running command in terminal:

sudo apt install ./Downloads/lazpaint*.deb

Once installed, open it from system application launcher and enjoy!

(Optional) To remove LazPaint simply run command in terminal:

sudo apt remove lazpaint

In App Review LazPaint

[Quick Tip] Drag and Drop Pasting File / Folder Path into Terminal

Last updated: April 24, 2024

Familiar with Linux commands? You may already know many tips and tricks that will save you a lot of time.

Here are some that I have been using for a long period of time, including Tab auto-completion, when you type something in Linux terminal and hit Tab, it auto-completes the command or file path, or outputs all possible options.

And Ctrl+Shift+V will do paste text to terminal instead of Ctrl+V. Without copying to the clipboard, you can simply select / highlight the text and use mouse middle-click to paste into terminal.

Today I found a new terminal tips that I didn’t know before. Thanks to the reddit, I’m going to share it with you by following steps.

1. Drag and drop file or folder to paste the path into terminal.

Just drag and drop a file or folder into terminal, and you’ll see the full path pasted with single quotes. It’s useful if there’s special character in file path or you just don’t want to type …

2. Drag and drop a selection of text into terminal.

You can also drag and drop a selection of text into terminal, so you don’t need to do copy and paste with context menu clicks or keyboard shortcuts.

In command skills command skill

Voice Chat App Mumble 1.3.3 Released with Stability Improvements[PPA]

Last updated: October 7, 2020

Mumble, open source, low-latency, high quality voice chat software, released version 1.3.3 a few days ago. PPA updated for Ubuntu 16.04, Ubuntu 18.04, and Ubuntu 20.04.

Changes in Mumble 1.3.3 include:

Fix chat box invisble (zero height)
Fix handling of invalid packet sizes
Fix race-condition leading to loss of shortcuts
Link in About dialog is now clickable again
Fix sizing issues in ACL-Editor
PulseAudio now always samples at 48 kHz
Fix server crash due to problems when using PostgreSQL

How to install Mumble 1.3.3 in Ubuntu:

The official release PPA has made the packages for all current Ubuntu releases.

1. Open terminal either from system application launcher or by pressing Ctrl+Alt+T on keyboard. When it opens, paste below command and hit Enter:

sudo add-apt-repository ppa:mumble/release

Type user password (no asterisk feedback) when it prompts and hit Enter to continue adding the PPA.

2. If an old release was installed, simply upgrade Mumble via Software Updater:

Or run commands one by one in terminal to check updates and install the chat utility for gamer:

sudo apt-get update

sudo apt-get install mumble mumble-server

Uninstall Mumble:

You can purge the PPA which also downgrade the VoIP chat app to the stock version via command:

sudo apt-get install ppa-purge && sudo ppa-purge ppa:mumble/release

To simply remove mumble, either use system package manager or run command in terminal:

sudo apt-get remove mumble mumble-server

In News VoIP Chat for Gamer

Python 3.9.0 Released, How to Install via PPA in Ubuntu

Last updated: October 6, 2020

Python programming language 3.9.0 was released with new features and optimizations. Here’s how to install it in Ubuntu 16.04, Ubuntu 18.04, and Ubuntu 20.04 via PPA.

Python 3.9.0 is the first version default to the 64-bit installer on Windows. Windows 7 is unsupported.

Python 3.9.0 release highlights:

Module State Access from C Extension Methods
Union Operators in dict
Type Hinting Generics In Standard Collections
Flexible function and variable annotations
Python adopts a stable annual release cadence
Relaxing Grammar Restrictions On Decorators
Support for the IANA Time Zone Database in the Standard Library
String methods to remove prefixes and suffixes
New PEG parser for CPython
Garbage collection does not block on resurrected objects;
os.pidfd_open added that allows process management without races and signals;
Unicode support updated to version 13.0.0;
when Python is initialized multiple times in the same process, it does not leak memory anymore;
A number of Python built-ins (range, tuple, set, frozenset, list, dict) are now sped up using PEP 590 vectorcall;
A number of Python modules (_abc, audioop, _bz2, _codecs, _contextvars, _crypt, _functools, _json, _locale, operator, resource, time, _weakref) now use multiphase initialization as defined by PEP 489;
A number of standard library modules (audioop, ast, grp, _hashlib, pwd, _posixsubprocess, random, select, struct, termios, zlib) are now using the stable ABI defined by PEP 384.

How to Install Python 3.9.0 in Ubuntu:

1.) Open terminal either by pressing Ctrl+Alt+T on keyboard, or by searching for ‘terminal’ from system application launcher.

When terminal opens, run command to add the “deadsnakes” team PPA:

sudo add-apt-repository ppa:deadsnakes/ppa

Type user password (no asterisk feedback) when it prompts and hit Enter to continue.

2.) Then run commands to refresh system package cache, and install Python 3.9:

sudo apt update

sudo apt install python3.9

3.) Once successfully installed, check your system Python versions (python –version):

4.) (NOT Recommended) To use Python 3.9 as the default python3, run commands:

sudo update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.8 1

sudo update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 2

For Ubuntu 16.04 and Ubuntu 18.04, replace python3.8 in the code with system’s default python3 version..
And you can then switch between the two Python3 versions via command:

sudo update-alternatives --config python3

NOTE: Due to known bug, terminal won’t open if you changed python3 symlink. An workaround is recreate a symlink via command (Replace python 3.8 with your system default python3 version):

sudo rm /usr/bin/python3; sudo ln -s python3.8 /usr/bin/python3

Uninstall:

To uninstall the Python3.9 packages, run command:

sudo apt remove --autoremove python3.9 python3.9-minimal

To remove the Deadsnakes PPA, launch Software & Updates and go to Other Software tab, then remove the repository line and close the window.

In News python 3.9

GIMP Image Editor 2.10.22 Available to Download [PPA]

Last updated: October 5, 2020

GIMP image editor 2.10.22 available to install in Ubuntu 18.04 and Ubuntu 20.04, though it’s not officially announced at the moment.

GIMP 2.10.22 was ready to download in its website last night. Release highlights in the new release inlcude:

HEIF support improvements: optional exporting with high bit depth, AVIF importing and exporting
Multiple improvements in Corel PaintShop Pro support
“Sample merged” now available in GEGL operation tool options
“Sample merged” is now enabled by default for color picking
The option enabling OpenCL support has been moved to the Playground tab in Preferences
Matting Levin is now the default engine of Foreground Select tool as it performs a lot better
New progressive performance logs and dashboard updates
Verbose debug now shows Flatpak info when relevant
Various bug fixes

How to Install GIMP 2.10.22 in Ubuntu:

The GIMP flatpak is recommended for Linux, and you can get it in flathub repository.

For those prefer installing deb package via apt, the unofficial PPA contains the packages for Ubuntu 18.04 and Ubuntu 20.04.

There’s known issue of the PPA packages: translations won’t install, so GIMP will always work in English.

1.) Open terminal from system application launcher. When it opens, run command to add the PPA:

sudo add-apt-repository ppa:ubuntuhandbook1/gimp

Type user password (no asterisk feedback) for sudo prompts and hit Enter to continue.

2.) If an old version of GIMP .deb package was installed, upgrade it via Software Updater (Update Manager) utility.

or run apt commands in terminal to install GIMP:

sudo apt update

sudo apt install gimp gimp-gmic

If an old version was installed, it’s recommended to run sudo apt upgrade which will also update the required babl, gegl libraries.

How to Restore:

To restore GIMP to the stock version in main Ubuntu repository, run command to purge the PPA:

sudo apt install ppa-purge && sudo ppa-purge ppa:ubuntuhandbook1/gimp

In News gimp

Folder Comparison and Synchronization App FreeFileSync 11.2 Released

Last updated: October 4, 2020

FreeFileSync 11.2, folder comparison and synchronization software to create and manage backup copies of all your important files, was released a few days ago.

Changes in FreeFileSync 11.2 include:

Improved grid layout with file icons hidden
Improved rendering of inactive and disabled grid items
Remember last user-selected paths for file and folder pickers
Fixed folder name hidden in “item name” view type
Fixed determination of unsupported trash folder (Linux)
Fixed copying broken symlinks (macOS)
Fixed default action when pressing Enter in popup dialogs
Fixed default popup dialog size (macOS)
Use localized start of week for %WeekDay% (Linux, macOS)
Swap sides using CTRL+W instead of F10
Show confirmation dialog before swapping sides

How to Install FreeFileSync in Ubuntu:

The software offers official Linux package (portable tarball contains executable and most run-time libraries) available to download at the link below:

Download FreeFileSync

Simply grab the Linux package, extract, and run the executable. You may also read this step by step guide to create an app launcher for this program.

In News folder comparison